Tips for Pressure Washing Your Pool Cage Safely and Effectively!
Tips for Pressure Washing Your Pool Cage Safely and Effectively!
A clean pool cage not only enhances your backyard’s appearance but also extends the life of the structure. Pressure washing is a fast, effective way to remove mold, mildew, dirt, and algae but it must be done carefully to avoid damage. Here are a few expert tips:
1. Choose the Right Pressure:
Use a pressure washer rated between 1200–2000 PSI with a wide-angle (40-degree) nozzle. Higher pressure can damage screens or aluminum frames.
2. Pre-Rinse and Inspect:
Before spraying, check for loose screws, rust spots, or damaged screens. Remove patio furniture and rinse the entire area to loosen debris.
3. Use the Right Cleaning Solution:
For stubborn mildew or algae, apply a mild detergent or a 10:1 water-to-bleach solution. Let it sit for 5–10 minutes before rinsing NEVER let it dry on the surface.
4. Spray Top to Bottom:
Start at the top of the cage and work your way down to avoid streaking. Keep the nozzle at least 12–18 inches away from the screen to prevent tearing.
5. Rinse Thoroughly:
Make sure all cleaning solutions are rinsed off to avoid residue buildup or discoloration.
Bonus Tip:
For tough stains or hard-to-reach areas, consider hiring a professional. The right tools and techniques make all the difference.
Maintaining your pool cage not only boosts curb appeal it protects your investment. Happy cleaning!
