exposed aggregate driveway cleaning Tampa

Exposed aggregate driveway cleaning in Tampa is a chemistry job first and a pressure job second. The decorative stone in an aggregate or shell driveway sits in a thin skin of cement paste, and once that paste is blasted away the stone starts letting go — one pebble at a time, permanently. Done right, the surface is cleaned at a pressure closer to a garden hose than a commercial washer, and the dirt is lifted chemically instead of chiseled off.
If you live on an acre or more out in Keystone, you probably have one of these driveways. They were the finish of choice for the custom builders working those lots, and for good reason: a long aggregate drive under oak canopy looks like it belongs to the land in a way poured gray concrete never does.
That same oak canopy is the problem.
Why aggregate driveways go dark under tree cover
Keystone's lots are shaded, damp, and full of leaf litter. Three things happen at once:
- Algae colonizes the low spots. The stone surface is textured, which means thousands of tiny shaded pockets holding moisture. That is ideal habitat.
- Tannins from oak and magnolia leaves stain brown. Wet leaves sitting on the drive for a week leave a shadow you can still see a year later.
- The cement paste erodes. Rain, irrigation overspray, and tire scrub thin it gradually. By year fifteen there is very little margin left for aggressive cleaning.
[PHOTO: before/after of a shaded exposed aggregate driveway under oaks — Keystone]
Can an exposed aggregate driveway be pressure washed?
Yes, but not at the pressure most people picture. We clean aggregate with a surface cleaner running well below what we'd use on a poured concrete slab, and we do the real work with a sodium hypochlorite mix that kills the organic growth and lets it rinse away on its own. Pressure is for rinsing, not for removing.
The telltale sign someone got this wrong is a driveway with light-colored streaks or wand marks where the exposed stone is suddenly rougher and the pebbles are standing proud of the surface. That is not a cleaning pattern. That is erosion, and it does not grow back.
What about shell and chattahoochee?
Shell driveways and the older chattahoochee river-rock finishes are even more fragile, because the binder was often a resin or a thinner topping. Those get hand-applied chemistry, a soft rinse, and no surface cleaner at all. On a loose shell drive — the real crushed-shell kind, not a cast finish — cleaning isn't the answer; refreshing the shell is.
How often does it need doing?
In our experience across the shadier parts of Hillsborough and Pasco:
- Heavily shaded lots: every 12 to 18 months. Algae comes back fast under canopy.
- Partial sun: every two years is usually plenty.
- Full sun, no overhanging trees: two to three years, mostly for traffic grime rather than growth.
Oil spots and tannin stains get treated separately, before the general wash, because a degreaser and a tannin remover do two different jobs and neither one is in the main mix.
What a proper job actually involves
Here is the sequence on a typical Keystone drive:
- Blow and clear all organic debris, including the joints at the apron and any landscape beds we'll be rinsing toward.
- Pre-wet and protect surrounding turf and plantings.
- Spot-treat oil, rust, and tannin stains individually.
- Apply the cleaning solution and give it dwell time — this is where the job is won.
- Low-pressure rinse, overlapping passes, no wand marks.
- Final neutralizing rinse and a walk of the whole surface with you.
[PHOTO: close-up of aggregate texture showing intact cement paste vs. stone standing proud]
The part that catches homeowners off guard is how much of this is waiting. A crew that shows up, fires a 4,000 psi wand at your driveway, and leaves in forty minutes did not clean it — they sanded it. We'd rather spend the extra hour letting chemistry do the work.
This is genuinely harder than it looks from the curb, and it is not a weekend project where a mistake is cheap. Once the paste is gone, the only fix is resurfacing the whole driveway.
Ready to get it handled
We clean aggregate, shell, paver, and poured concrete driveways across Keystone, Odessa, Lutz, and the rest of Hillsborough, Pasco, and Pinellas. Take a look at our exterior cleaning services, our luxury pressure washing and roof cleaning in Keystone, or the full range of residential services in Tampa.
Call 813-957-1174 for a free quote. We're a veteran-owned crew, we've been doing this on Tampa Bay's toughest driveways for years, and we'll tell you honestly if yours needs cleaning or something more.








































